Yokogawa BT200 Manual do Utilizador descarregar pdf (Página 3)

Write Protection

Brain Communication

Field Guide

FEBRUARY 2006

‘NO’. This indicates that this transmitter is

NOT password protected.

Section 2.4 Recovery Password

When you lose or miss-place your password,

it is possible to release the Password

Function by using the general password

“YOKOGAWA”. When this password is

used, you have

10 minutes to reset the

password only. No other parameters can be

changed during this time. Reset your

password per the procedure in Section 2.1.

Section 3.0 Software protection of the

external Zero Adjust Screw.

To disable the external Zero Adjust Screw,

set the parameter J15: EXT ZERO ADJ to

INHIBIT.

Note: If the Password Feature is enabled, the

password must be entered before the

parameter J15 can be changed.

Section 4.0 Transmitters with Displays

EJX Transmitters with LCD display will

indicate when the Write Protect is enabled.

A “Key” symbol will appear on the display

when the Write Protect is enabled.

(See Figure 4)

Section 5.0 Setting When Shipped

Hardware Write Protection (WR Switch):

“E” (Write Enabled)

Software Write Protection (Password

Feature): De-activated

External Zero Adjust Screw: Enabled

A “Key” symbol will

appear when the Write

Protect is enabled.

Figure 4

FGP-111

Page 3 of 3

1 2 3

Write Protection 1

Comentários a estes Manuais

Sem comentários