Yokogawa Data Acquisition with PID Control CX2000 Manual do Utilizador descarregar pdf (Página 22)

3-6

M-4659

Enter external input channel settings in the same manner as those of the measurement

channel items. Also note that this measurement channel setting screen is only one

example; your actual screen may vary.

Select this tab

Double-click to set the channel

Difference computation

Scaling

Square root

Select the input mode

Select the range/type

Select the alarm type

Select the relay number

Turn ON/OFF the partial

expanded display

Set the value to the

minimum value possible

Set the value to the maximum value possible

Select the reference channel for

the difference computation

Set the span

Enter the scale

Enter the scale unit

Enter the alarm value

Enter the tag name

Enter the alarm delay time

Enter the display zone

Select the graph setting

Select the channel display color

Initialize

Set the low cut

Select the ON/OFF

Enter the sampling count

Set the green band

Select the mark type

Click here to set the

calibratin correction

(see page 3-8)

Set all

Copy the settings of the first channel in

the selected range to all other channels

3.3 Setting the Measurement Channels, Ext. Channels

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 285 286

Comentários a estes Manuais

Sem comentários

Yokogawa Data Acquisition with PID Control CX2000 Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Yokogawa Data Acquisition with PID Control CX2000