Yokogawa EJA115 Manual do Utilizador descarregar pdf (Página 20)

IM 01C22T03-00E

4-5

4. GETTING STARTED

COMM DTM Configuration

In the Network Configurator window, click [Action] →

[COMM DTM Configuration].

Select the baud rate for the DP/PA coupler (or link).

Click [Defaults] to change the data to the default

setting, or enter the desired bus parameters.

Click [OK]

IMPORTANT

When comm DTM is connected to the

PROFIBUS network with class I master running,

set the same busparameters of class I master.

Figure 4.7 COMM DTM Configuration

Exit Function Configuration-DTM Works.

Click [×]

When queried “Do you want to exit DTM Works?”,

click [Yes].

[Yes].

Figure 4.8 Exit Function Configuration

Running Scan List

In the Network Configurator window, click [Action] →

[Scan List] → [Scan].

When queried “DTM is disconnected. Do you want to

connect now?”, click [Yes].

Figure 4.9 Setup Scan List

Confirm Address No.

Confirm the address no. and then click [Close].

Figure 4.10 Confirm Address No.

From the Network Configurator window, click [File]

→ [Save Configuration].

Click [File] → [Exit].

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

Sem comentários

Yokogawa EJA115 Manual do Utilizador Página 20