Yokogawa DAQWORX Manual do Utilizador descarregar pdf (Página 49)

2-19

IM WX103-01E

Index

Logger

Explanation

Input Mode and Measurement Range

The measurement channel settings differ depending on the combination of the

MXLOGGER software version and the MX100 hardware style number. The table below

shows the relationship between MXLOGGER measurement channel settings (by

software version) and the MX100 hardware style.

MXLOGGER MX100 Hardware

Style Number

Notes

Software version

Connectable module types

or setting items

S3 S2 S1

R2.05 or later 30ch module

MX110-VTD-L30

Yes No No

GOST range Yes No No Can be set only for MX110-UNV-M10,

MX110-UNV-H04, MX110-V4R-M06, and

MX110-VTD-L30

es: Setting and operation allowed No: Setting possible, but not operation

*1 T

o check the version, see section 2.16, “Displaying the Software Version and Other

Information.”

*2 The style number is printed on the MX100 main module name plate.

On the channels of the universal input module, select from the modes below according

to the input signal. For details of the measurable range, measurement accuracy, and

resolution, see chapter 4, “Specifications” in the MX100 Data Acquisition Unit User’s

Manual (in the manual CD-ROM)

•

VOLT (DC voltage)

Select the measurement range from 20 mV

, 60 mV, 200 mV, 2 V (default), 6 V

, 20 V,

100 V, 60 mV (HQ), 1 V (HQ), and 6 V (HQ). HQ denotes high resolution.

Note

Current input is possible by attaching a shunt resistor to the input terminal and converting to voltage

input. The shunt resistors in the table below are available for purchase separately. For example, a

250 Ω shunt resistor is used to convert the signal in the range of 1 to 5 V for 4 to 20 mA input.

Part Name Model Resistance

Shunt resistor 415920 250 W ± 0.1%

(for clamp terminal) 415921 100 Ω ± 0.1%

415922 10 Ω ± 0.1%

Shunt resistor 438920 250 Ω ± 0.1%

(for screw terminal) 438921 100 Ω ± 0.1%

438922 10 Ω ± 0.1%

• TC (Thermocouple)

Select the thermocouple type (referred to as Range in the setup) from Type-R (default), Type-S,

Type-B, Type-K, Type-E, Type-J, Type-T, Type-N, Type-W, Type-L, Type-U, and KpvsAu7Fe,

PLATINEL, PR40-20, NiNiMo, WRe3-25, W/WRe26, Type-N(AWG14), and Type-XK.

• RTD1 (resistance temperature detector, measurement current: 1 mA) on the 4-CH,

High-Speed Universal Input Module

Select the RTD type (referred to as Range in the setup) from Pt100 (default), JPt100,

HQ Pt100, HQJPt100, Ni100:SAMA, Ni100:DIN, Ni120, RN Pt100, RN JPt100 and

Pt100G. HQ and RN denote high resolution and noise resistance, respectively.

2.4 Setting the Measurement Conditions (Measurement Channel Settings)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 162 163

Comentários a estes Manuais

Sem comentários

Yokogawa DAQWORX Manual do Utilizador Página 49

Comentários a estes Manuais

Manuais e produtos relacionados com Software Yokogawa DAQWORX