Yokogawa Removable Chassis DX1000N Manual do Utilizador descarregar pdf (Página 21)

2-6

IM 04L41B01-03E

2.3 Using the Event Action Function

The event action function performs a specified action when a specified event occurs.

For example, you can use the event action function to write a message when an alarm

occurs. When you use the multi batch function, you have to specify the batch group

to perform the action on. In the above example, you could configure the DX to write a

message to batch group 2 when an alarm occurs. When you configure an action that

requires you to specify a batch group, a box for selecting the batch group is displayed.

Setup Example: Starting and Stopping the Recording of Batch Group 2

In the example below, the remote control function (/R1 and /PM1 options) is used to start

and stop the recording of batch group 2 according to the input received by remote control

input 1. Logic box number 1 is used.

• Setup Screen and Setup Items

Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event action

> Event action.

Select 1.

Set the event to the reception of input by

remote control input terminal 1.

Set the action to the starting and stopping

of the recording of batch group 2.

* Setting Target Action to All specifies all the batch groups.

Starts and stops the recording of batch group 2 according to the input signal received by

remote control input terminal 1.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Sem comentários

Yokogawa Removable Chassis DX1000N Manual do Utilizador Página 21