Yokogawa Value Series FX1000 Manual do Utilizador descarregar pdf (Página 35)

2-22

IM 04L21B01-64EN

Trend

• Display Update 2nd Interval

Enabled when [Trend Rate Switching] is turned [ON] under [Environment] - [Detail

Setting] in the [Basic Setting] tab. Select a rate from the list.

The selectable 2nd intervals are the same as those for Trend interval.

• Direction

Set the display direction of the trends to [Horizontal], [Vertical], [Wide], or [Split].

• Trend Clear

Settings Description

ON Clears the displayed waveform when the memory sampling is started.

OFF Does not clear the waveform when the memory sampling is started.

• Message direction

Set the display direction of messages to [Horizontal] or [Vertical]. When the trend is

set to Vertical, the message direction is xed to [Horizontal].

• Scale Digit

Select the [Normal] or [Fine].

Fine If the scale value is two-digit display, it can be changed to three digits. For

example, if the scale range is “49.0 to 51.0,” the scale values are displayed

using 3 digits as shown below.

• Value Indicator

The current value is displayed as a mark or a bar graph.

• Trend Line

Set the line width of the trend in dots (1 to 3).

• Grid

Select the number of grids to be displayed in the waveform display area of the trend

display.

Settings Description

4 to 12 Displays a grid that divides the display width into 4 to 12 sections.

Auto Displays the same number of grids as the number of scale divisions of the

first assigned channel of the group.

2.5 Entering General Settings

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 94 95

Sem comentários

Yokogawa Value Series FX1000 Manual do Utilizador Página 35