Yokogawa DR240 Manual do Utilizador descarregar pdf (Página 73)

6-19

IM DR231-11E

Commands

• Parameters p7 and p8 are set in the range from 1

to the last data number in the file.

• Channel numbers are recognized in the order of

input channel and channel for computation. If you

set 005 for the first channel and A10 for the last

channel, an ASCII conversion will be made in

input channel 005 to the last input channel as well

as channels A01 to A10 for computation.

• This command is not executable during

computation.

FV Stores setting data on a floppy disk.

Mode Operation mode

Setting FVp1<terminator>

p1 File name (up to eight characters)

Example Store the setting data with the file name SET1.

FVSET1

Comments • This command is effective only with an optional

floppy disk drive function.

• Setting data in the setup mode cannot be stored.

To store them, use a YV command.

• This command is not executable during

computation.

FL Reads the setting data from a floppy

disk.

Mode Operation mode

Setting FLp1 p2<terminator>

p1 Method of reading data:

DIRECT Starts reading data

immediately after sending an

FL command.

TRIG_1 to 3 Starts reading data at the same

time as an event occurrence in

event/action functions.

p2 File name

Example Read setting data with the file name SET1

immediately.

FLDIRECT, SET1

Comments • This command is effective only with an optional

floppy disk drive function.

• Setting data in the setup mode cannot be read. To

read them, use a YL command.

• If TRIG_1 to TRIG_3 are set to p1, event/action

functions need to set FLOPY:LD_TRG1 to 3 for

their actions.

• This command is not executable during

computation.

FE Deletes a file on a floppy disk of

setting data.

Mode Operation mode

Setting FEp1<terminator>

p1 File name

Example Delete the file SET2.

FESET2

Comments • This command is effective only with an optional

floppy disk drive function.

• A data file in the setup mode cannot be deleted.

To delete it, use a YE command.

YV Stores set data in the setup mode on

a floppy disk.

Mode Setup mode

Setting YVp1<terminator>

p1 File name (up to eight characters)

Example Store set data in the setup mode with the file name

SET1.

YVSET1

Comments • This command is effective only with an optional

floppy disk drive function.

YL Reads set data in the setup mode

from a floppy disk.

Mode Setup mode

Setting YLp1<terminator>

p1 File name (up to eight characters)

Example Read set data in the setup mode, which are on the

disk with the file name SET1.

YLSET1

Comments • This command is effective only with an optional

floppy disk drive function.

YE Deletes a file on a floppy disk(Setup

Mode).

Mode Setup mode

Setting YEp1<terminator>

p1 File name

Example Delete the file SET2.

YESET2

Comments • This command is effective only with an optional

floppy disk drive function.

BL Executes the initial balancing of the

strain input channel

Mode Operation mode

Setting BLp1, p2, p3<terminator>

p1 The first channel for executing the initial

balancing

p2 The last channel for executing the initial

balancing

p3 Select either initial balancing or initialization

EXEC: Execute initial balancing

INIT: Execute initialization

Example Execute initial balancing on subunit 0 and channels

01 to 08.

BL001, 008, EXEC

Comments • Channels other than strain input channels or

channels that are not connected within the

specified range are ignored.

• Initial balancing and initialization can not be

executed during a report.

• If initial balancing is executed, number-of-

channels worth of data are returned in the

following format.

S1 S2 CCC DDCrLf

S1: Data status 1

N: Normal

S: SKIP

S2: Data status 2

Space: Data in the middle

E: Data at the end

CCC: Channel number

DD: Result of the initial balancing

OK: Initial balancing succeeded

NG: Initial balancing failed

DF: Default values set

_: Skip module

DR Start/stop the report

Mode Operation mode

Setting DRp1<terminator>

p1 Start/stop the report

6.6 Control and Execution Command

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 120 121

Comentários a estes Manuais

Sem comentários

Yokogawa DR240 Manual do Utilizador Página 73

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Yokogawa DR240