Yokogawa DAQWORX Manual do Utilizador descarregar pdf (Página 161)

6-34

IM WX104-01E

6.5 Entering Basic Settings

Environment

Basic Environment

• Data Kind

Settings Description

Display Records display data.

E+D Records display data and event data. You cannot select [E+D] when [Trend

Rate Switching] under [Environment] - [Detail Setting] under the [Basic

setting] tab is set to [ON]. You cannot select [E+D] if you are using the multi

batch function (/BT2 option; release number 3 or later). You can set the multi

batch function by setting [Batch operation qty] under [Environment] - [Detail

Setting] in the [Basic setting] tab.

Event Records event data.

• Temperature Unit

Select C or F.

• Time zone

Set the time zone of the region in which the DX will be used in terms of the time

difference from GMT. A negative value indicates that the local time is behind the GMT.

• Time deviation limit

Time deviation limit

Current time

Specified time

When the time deviation between the time on the DX and the specied time is within

±(the value specied here), the time on the DX is gradually corrected. Otherwise, the

clock is corrected immediately.

Select from 10 s to 5 min. Select [OFF] to disables the function.

Example: If [Time deviation limit] is set to 10s and the time on the DX is 10 hours 21 minutes

15 seconds, the time on the DX is gradually corrected if the specified time is between

10 hours 21 minutes 5 seconds and 10 hours 21 minutes 25 seconds.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 335 336

Sem comentários

Yokogawa DAQWORX Manual do Utilizador Página 161