Yokogawa DAQWORX Manual do Utilizador descarregar pdf (Página 184)

6-57

IM WX104-01E

Index

Configuring the DX1000/DX2000

POP3 settings (Release number 3 or later)

• POP3 Server name and Port number

Enter the POP3 server host name or IP address.

• Port number

Use the default setting unless you need to change it. The default value is 110.

• Login name

Enter the POP3 server login name.

• Password

Enter the POP3 server login password using up to 32 characters. An entered

password is displayed as “********.”

• Send delay [second]

Set the delay between POP3 server authentication and transmission to a value from 0

to 10 seconds.

• POP3 Login

To encrypt the password when logging into the POP3 server, select APOP. To send it

in plain text, select PLAIN.

Auth. Settings (Release number 4 or later)

To enable support for authenticated e-mail transmission (Authentication SMTP), set a

user name and password to use for authentication.

• User name

Enter the user name. You can enter up to 32 characters.

• Password

Enter the password. You can enter up to 32 characters. The password is displayed as

“**********.”

Alarm

Specify the settings for sending e-mail when alarms occur.

• Recipient1 and Recipient2

Set the e-mail recipients. For Recipient1 and Recipient2, select [ON] to send e-mail

or [OFF] to not send e-mail.

• Active alarms

Sends an e-mail when an alarm occurs. You can select [ON] (send e-mail) or [OFF] (not

send e-mail) for alarms 1 to 4.

• Include INST

Select [ON] to attach instantaneous value data when the alarm occurred.

• Include source URL

Select [ON] to attach the source URL. Attach the URL when the Web server is

enabled.

• Subject

Enter the subject of the e-mail using up to 32 alphanumeric characters. The default

setting is Alarm_summary.

• Header1, Header2

Enter header 1 and header 2 using up to 64 characters.

• Sened alarm action (Release number 3 or later)

To send an e-mail when an alarm occurs and when it is cleared, select [ON+OFF]. To

only send an e-mail when an alarm occurs, select [ON].

• Include tag/ch in Subject (Release number 3 or later)

Select [ON] to include a tag number in the subject. If the tag number is not set, the

corresponding channel number is included.

6.5 Entering Basic Settings

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 335 336

Comentários a estes Manuais

Sem comentários

Yokogawa DAQWORX Manual do Utilizador Página 184

Comentários a estes Manuais

Manuais e produtos relacionados com Software Yokogawa DAQWORX